WAFER PLATING
Smart Cell® (W) Silicon Wafer-use Set Assembly Example
Example of a combination of a smart cell water tank, jig, heater, and stirrer.
Ideal for basic experiments such as plating silicon wafer chips and bump plating.
Structure of Smart Cell
The Smart Cell is used by placing on a magnetic stirrer and the stirrer is rotated. As shown in the figure below, overflow circulation allows the plating area to maintain a constant liquid level even when the plating solution evaporates, thus ensuring stable current distribution and plating area.
Assembly Example
- Tank: Two types of tank capacities are available: 500mL and 1000mL.
- Jigs: Two types of jigs for anode and cathode are available: 10x15mm and 30x30mm.
10x15mm jig can be installed for 500mL tank and both 10x15mm and 30x30mm jigs for 1000mL tanks, respectively. - Heater: Micro Cell Ⅰw /Ⅱw Heater is compatible for 500mL tanks / Hull Cell Heater for 1000mL tank
- If you require other capacities or jig size, we will accept special orders.
- If you wish to use a hot stirrer, please use the Smart Cell glass type (A-56-0500G).
- Not sold as a set.
Tank |
Cathode Jig | Anode jig |
Heater | Thermostat
|
Paddle Cathode Rocker |
Smart Cell 500W(Tank volume: 500mL)
Product No. | Product Name |
A-56-0500W | Smart Cell 500w |
A-53-M1-P05WA | Micro Cell Ⅰw /Ⅱw Heater w/Thermal Fuse (DC48V,50W) |
B-93-YTC300 | Thermostat YTC300 (AC100-230V, 300W) |
B-93-YTC-P02 | Thermostat YTC Sensor Clasp (Type-L) |
A-55-PCR200BWA1 | Paddle Cathode Rocker 200BWA (with B-75-P16A Controller) |
B-62BW-P01 | Stirrer Cover (Height is up to 95mm) |
A-53-M1-P061015 | Micro CellⅠⅡⅢ Cathode Jig (for 10X15㎜ Test Pieces) Busbar not included |
A-53-M1-P071015 | Micro Cell (Ⅰ/Ⅱ/Ⅲ) Anode Jig (for 10X15㎜ Test Pieces) Busbar not included |
A-56-0500W-P01 | Smart Cell 500w Busbar (for 10X15mm Test Pieces) |
A-57-15100-P01A | Programmable Power Supply YPP3,10A Lead Wires (2pcs.w/titanium clip 2pcs , copper clip 1pc) |
A-53-M1-P08 | Anode plate and anode bag (Standard size:59×95×t2mm) Please select from A-53-M1-P08(Micro Cell MODELI) |
*Please prepare a stirrer
Smart Cell 1000W(Tank volume: 1000mL)
Product No. | Product Name |
A-56-1000W | Smart Cell 1000w |
B-58WB | Hull Cell Heater WB/Thermal Fuse (DC48V,100W) |
B-93-YTC300 | Thermostat YTC300 (AC100-230V, 300W) |
B-93-YTC-P02 | Thermostat YTC Sensor Clasp (Type-L) |
A-55-PCR200BWA1 | Paddle Cathode Rocker 200BWA (with B-75-P16A Controller) |
B-62BW-P01 | Stirrer Cover |
A-53-M1-P061015 | Micro CellⅠⅡⅢ Cathode Jig (for 10X15㎜ Test Pieces) Busbar not included |
A-53-M1-P071015 | Micro Cell (Ⅰ/Ⅱ/Ⅲ) Anode Jig (for 10X15㎜ Test Pieces) Busbar not included |
A-53-M3-P063030 | Micro Cell (Ⅲ) Wafer Cathode Jig (for 30×30㎜ Test Pieces) Busbar not included |
A-53-M3-P073030 | Micro Cell (Ⅲ) Wafer Anode Jig (for 30×30㎜ Test Pieces) Busbar not included |
A-56-1000W-P01 | Smart Cell 1000w Busbar (for 10X15㎜ 30X30㎜ Test Pieces) |
A-57-15100-P01A | Programmable Power Supply YPP3,10A Lead Wires (2pcs.w/titanium clip 2pcs , copper clip 1pc) |
A-53-M2-P08 | Anode plate and anode bag (Standard size:74×105×t2mm) Select the from A-53-M2-P08(Micro Cell MODELⅡ) |
*Please prepare a stirrer
関連製品
Related Products
-
Double-sided Wafer Plating Equipment (A-52-STD)
A double-sided plating device on a wafer, especially suitable for TSV and TSG plating, from 2 inch to 8 inch.
-
Micro Cell (Ⅰw) Silicon Wafer-use Set YTC300 A-53-*-ST01WB
-
B-90-AVS-10 VACUUM DEFOAMER [AUVACS]
-
Silicon Wafer Cathode Cartridge(High current type)(A-52-STH*-P02A)
Silicon Wafer Cathode Cartridge(High current type)(A-52-STH*-P02A)
-
Smart Cell ®(Model-500G)(A-56-0500G)
It is a glass tank type of the smart cell series that overflow circulates using a magnetic stirrer without using pumps. Fluctuations in the liquid level due to evaporation, etc., can be suppressed by overflow stirring, and stable current distribution and plating area can be maintained.
-
SILICON WAFER PLATING TANK (A-52-ST-P01A)