B-72WJ SPIRAL CONTRACT-METER SET

A set that combines a temperature controller B-93C for Japan and a heater with a temperature fuse (AC100V).

Spiral Contract-Meter is a test equipment used to measure the internal stress of plating film.

Features

● Compliant with JIS H8626 and ASTM B636/636M-15 standards. (4000mL tank is compliant with ASTM standard).
● Excellent reproducibility
● Can be used for alkaline plating bath.
● Can measure internal stress by voluntary timings.
● Can start quickly since the set contains clasps for electro degreasing and strike plating.
● Can be used for electroless plating and low-stress plating too. (requires separately

Set includes

B-72-P01WJ Spiral-Contract meter Tank (MODEL-w) 2500mL 1
B-72-P02 Spiral-Contract meter 1
B-72-P14A Spiral Test Piece (0.2㎜ thickness, standard item, 5 pcs.) 1
B-72-P19A Spiral-Contract meter Stand 1
B-72-P20 Spiral-Contract meter Constant Measurement Component 1
B-72-P41 Spiral-Contract meter Stainless-steel Plate w/Clasp for Electrolytic Degreasing (2 pcs.) 1
B-72-P42 Spiral-Contract meter Electrolytic Nickel Plate w/Clasp for Electrolytic Nickel Strike (2 pcs.) 1
B-72-P33A Spiral-Contract meter Lead Wire (w/Titanium Clip, Red: 4 wires,Y8 pin ) 1
B-72-P33A-1 Spiral-Contract meter Cathode-contact Lead Wire (black, Y8 pin)Titanium Clip 1
A-63-S101 Air Pump S101 (AC100V) 1
B-93C 1KW Digital-type Thermostat 1
B-58WJB Hull Cell Heater WJB /Thermal Fuse (AC100V,100W) 2

*Anode plates are sold separately.

Related Video

Related Articles

Measurements of Internal stress in Electrodeposits Journal of the Surface Finishing Society of Japan The Surface Finishing Society of Japan 2007

Frequently Asked Questions about Stress Meter

 

Related Products

  1. B-77WJ HARING CELL SET (Type WJ)

    Haring Cell is used to identify macro throwing power of various plating solutions.

  2. A-45WJ /A-45W HIGH SPEED PLATING HULL CELL TESTING KIT

    A Hull cell teste that deposited film with a current density distribution for each stirring speed can be obtained on a single test piece. High-speed plating enables experiments with a current density closer to the actual site.

  3. B-72WJ-SG STRAIN GAUGE TYPE STRESS METER

  4. B-52W-YTC300 HULL CELL TEST KIT Model-YTC300

  5. B-77W-YTC300 Haring Cell Macrothrowing Power Testing Kit YTC300

    A set that combines CE marking with a temperature controller that supports AC100-230V voltage and a heater with a thermal fuse (DC48V).

  6. B-52-1CWJ HULL CELL TEST KIT MODEL-10A15

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top