B-73-02AW MINI BARREL FOR ELECTROLESS PLATING(drum type)

Horizontal-type barrel equipment for electroless plating with drum volume of 145mℓ. Since drum is removable, articles for plating can be easily taken in and out. Mesh-size can be adjusted.
The main unit can also be used with the magnetic-disc type (B-73-03A).

Specification

No. of Drum Rotations5-34rpm
MaterialPP, etc.
Outer (Installation) Dimensions160 (W)×100 (D)× 235 (H) mm
Drum VolumeApprox. 145mL
Main Unit Weight1.1kg
Heatproof Temp.90℃
Input VoltageAC100V-240V

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. B-76-V MINI DECOMPRESSION WATER TANK FOR BARREL

  2. Tapered Barrel Syachihoko® WJ Filter Set (B-76-KWFNWJST2A)

    A set of tapered barrel plating equipment "Shachihoko". Since consists of barrel, heaters, tank, filter, anode plates and other peripherals, convenient to build fine plating process.

  3. MINI BARREL MODEL 1-Bw/1-Cw(B-75BW/B-75CW)

    Horizontal-type barrel for electroplating with drum volume of 140mL. Mesh-size can be adjusted. For 30 years, the Mini-Barrel has been our longest-selling product.

  4. Tapered Barrel Plating Equipment “Shachihoko”(B-76-KWFN-W)

  5. B-73-03AW MINI BARREL FOR ELECTROLESS PLATING (disk type)

  6. Micro Barrel Drum（B-74-M1-P08）

    The drum for MicroBarrel uses a porous drum, which allows liquid to pass through the gaps between the microscopic particles of 10 to 30 µm, resulting in better liquid circulation compared to drums without holes.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top