B-77WJ HARING CELL SET (Type WJ)

Trademark Registered

Haring Cell Type WJ : A set that combines a temperature controller B-93C for Japan and a heater with a temperature fuse (AC100V).

Haring Cell is used to identify macro throwing power of various plating solutions.

Two cathode plates (test pieces) are fixed to both sides of the tank, and an anode plate is placed in between two cathodes. When the anode is placed at the center of cell, the weight of deposited metal on each cathode become equal.
By changing the balance of distances to the anode from cathodes on both sides and observing the differences of the weight of deposited metal for each cathode, it becomes possible to identify the characteristics of the plating solution.
Mainly used for development of plating solutions, experiment to change the distance between electrodes, and so on.
By using bent cathodes (sold separately), the unit can also be used for covering power testing.

Set Includes

Set with CE marking is also available : B-77W-YTC300 >

Product No.	Product Name	Quantity
B-77-P01W	Haring Cell Tank (w/Anode-busbar) (MODEL-w)	1
B-77-P04	Stainless-steel Busbar (3 pcs.) applying Haring Cell	1
B-77-P06	Haring Cell Anode Plate Sumitomo Electrolytic Nickel(for Watts Bath)	1
B-77-P07	Haring Cell Anode Plate High-Purity Zinc	1
B-77-P12	Haring Cell Anode Plate Phosphorous Copper (for Copper Sulfate Bath)	1
B-77-P31A	Haring Cell Cathode Plate Iron (film-type/100pcs)	1
B-77-P33	Haring Cell Cathode Plate Brass (100pcs)	1
B-77-P28	Haring Cell Anode Plate Anode Bag (Not brushed)	2
B-77-P28-1	Haring Cell Anode Plate Anode Bag (brushed fabric)	1
A-63-S101	Air Pump S101 (AC100V)	1
B-58WJB	Hull Cell Heater WJB /Thermal Fuse (AC100V,100W)	2
B-93C	1KW Digital-type Thermostat	1
A-57-15100-P01A	Programmable Power Supply YPP3,10A Lead Wires (2pcs.w/titanium clip 2pcs , copper clip 1pc)	2

Measuring Throwing Power
This article explains “What is throwing power?” ,” What is the Haring cell Test?” and “the usage of haring cell test”.

Related Products

PLATING TESTER

B-72W1-YTC300 SPIRAL CONTRACT-METER SET（JIS/ASTM)
PLATING TESTER

A-46WJ /A-46W AGITATION EFFECT TESTING KIT

This is a test device that plating a disk-type test piece (φ64xt03mm) while rotating it with a motor. The effect of agitation speed at a constant current density can be obtained on a single test piece. The effect of the additive on the agitation speed is noticeable.
HULL CELL, PLATING TESTER

HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

Hull Cell Test Kit that consist of Thermostat and Heater with built-in thermal fuse. This set is compliant with IEC standard and bears CE marking.
PLATING TESTER

B-72WJ-SG STRAIN GAUGE TYPE STRESS METER
PLATING TESTER

A-45WJ /A-45W HIGH SPEED PLATING HULL CELL TESTING KIT

A Hull cell teste that deposited film with a current density distribution for each stirring speed can be obtained on a single test piece. High-speed plating enables experiments with a current density closer to the actual site.
HULL CELL, PLATING TESTER

B-52-1CWJ HULL CELL TEST KIT MODEL-10A15

PLATING TESTER