Wafer Anode Holder

Anode holder for silicon wafers. Standard and sealed types come with an anode bag.

Acrylic anode holders can be used at temperatures up to 65°C. PPS anode holders can be used at temperatures up to 80°C.

Features

  • This anode jig is specially designed for plating laboratory equipment for silicon wafers, which is intended for wet plating.
  • It can be used for precision plating of semiconductors, MEMS, anode oxidation, etc.
  • Ideal for 2 to 12 inch size experiments and small lot production.
  • By replacing the anode holder holder on the front, it can be used for smaller size wafers as well.

Types of Anode Holders

The following three types of anode holders are available. Please select the type according to the type of cathode cartridge used. 6inch and larger can be selected from the orifler type and notch type. Other sizes

Standard Type Sealed Type Diaphragm type
Standard Size 2~12inch 2~12inch 2~12inch
Material Acryl PPS Acryl
Heatproof Temp. 65℃ 80℃ 65℃
Application ・For Standard cathode cartridge
・for soluble anodes		 ・For Sealed type cathode cartridge
・for soluble anodes		 ・for insoluble anodes

Notes

  • Both orientation flat type and notch type are available. Please specify when ordering.
  • Jigs for double-sided plating and jigs for flexible substrates are also available by special order.

Related Products

  1. ,

    Programmable Power Supply YPP15031WA（10μA〜3A）(A-57-15031WA)

    A high-performance programmable power supply which equips estimation/calculation functions and 10μA of min. resolution. Supports Japanese, English, and Chinese.

  2. ,

    SMART CELL® Model-W (A-56-W)

    The Smart Cell is an overflow circulating tank using a magnetic stirrer. The patented Smart Cell structure maintains a constant liquid level in the plating area even when the plating solution evaporates, and maintains a stable current distribution.

  3. Double-sided Wafer Plating Equipment (A-52-STD)

    A double-sided plating device on a wafer, especially suitable for TSV and TSG plating, from 2 inch to 8 inch.

  4. ,

    SILICON WAFER PLATING TANK (A-52-ST-P01A)

  5. A-52 SILICON WAFER PLATING LABORATORY EQUIPMENT SET

    Plating set for 2～12 inch silicon wafers. By using dedicated jigs, precision plating of semiconductors, MEMS and micromachines is possible.

  6. Micro Cell (Ⅰw) Silicon Wafer-use Set YTC300　A-53-*-ST01WB

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top