Tapered Barrel Plating Equipment “Shachihoko”(B-76-KWFN-W)

For barrel plating of ultra-small parts, the selection of an adequate barrel and highly accurate power supply is essential. With the tapered barrel, the inside of the drum has been made smoother, and problems such as caught in the saran mesh and the contact of parts with each other, as well as the internal collection of hydrogen gas have been improved. By using a Programmable Power Supply featuring excellent current-voltage property, together with the tapered barrel, a wide range of plating is possible from trial production of small parts to actual production.

No. of Drum Rotations0-34rpm (variable)
MaterialPP, etc
Outer (Installation) Dimensions330(D) x 90(W) x 370(H) mm
Drum VolumeApprox. 100mℓ
(volume of samples: approx. 20ml)
Weight of main unit1.2 Kg
Heatproof Temp.90℃
Input voltageAC 100V - 240V

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. Drum for Tapered Barred Shachihoko and Shachihoko Mini

  2. TENORI (hand palm-size) BARREL Aw (B-76-02AW)

  3. Tapered Barrel – Syachihoko Mini Type WJ Filter Set

    Compact tapered barrel set that fits in a 5.5L overflow tank. Suitable for precious metal plating.

  4. Micro Barrel Drum（B-74-M1-P08）

    The drum for MicroBarrel uses a porous drum, which allows liquid to pass through the gaps between the microscopic particles of 10 to 30 µm, resulting in better liquid circulation compared to drums without holes.

  5. B-76-KWFN-ST3 TAPERED BARREL EQUIPMENT SET 3

  6. Mini Barrel1000（1L-Type））(B-73-1000)

    A horizontal barrel unit with a drum capacity of approximately 2,700 mL, which is larger than our conventional products. A sample volume of approximately 1L can be processed at a time.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top