Drums for horizontal barrel

Three types of drums for horizontal barrels are available: “Standard type (B type),” “Smooth type (D type),” and “Asperous type (D type).

For all three types, the mesh opening can be changed to 0.105 mm, 0.113 mm, 0.289 mm, 0.44 mm, and 0.97 mm (special order).

Please select a mesh drum in consideration of product size and liquid/gas outgassing.

Type B(Standard)Type C（smooth）Type D(Asperous)
段差ありBタイプ滑らかBタイプダイヤカットD
• Frame with mesh can be replaced with
screws.
• There is a step of about 3 mm between
the drum and the mesh inside.

[Compatible Product]
・B-75BW
・B-76-03W

[Special Order Available]
・B-76-02AW
・B-76-KWFN-W
・B-76-KWFN-BW1
・B-76-KWFN-BW2		• A smooth type with almost no steps
between the drum and the mesh inside.
• Mesh cannot be replaced.

[Compatible Product]
・B-75CW
・B-76-02AW
・B-76-03AW
・B-76-KWFN-W
・B-76-KWFN-BW1
・B-76-KWFN-BW2		• An asperous type that prevents items
from sticking to the side of the drum by
adopting asperous surface on the parts
other than the mesh part.
• Mesh cannot be replaced.

[Compatible Product]
・B-76-03AWD

[Special Order Available]
・B-75BW
・B-75CW
・B-76-02AW
・B-76-KWFN-W
・B-76-KWFN-BW1
・B-76-KWFN-BW2

 

 

Related Products

  1. PRETREATMENT AND WASH CONTAINER (B-76-KWFN-MK)

  2. Cradle Barrel (B-75DW)

    This product helps to untangle and reduce deformation by semi-rotating the plating objects that are easily scratched or deformed due to getting entangled in horizontal barrels.

  3. Tapered Barrel Plating Equipment “Shachihoko”(B-76-KWFN-W)

  4. B-76-KWFN-ST3 TAPERED BARREL EQUIPMENT SET 3

  5. Tapered Barrel – Syachihoko Mini Type WJ Filter Set

    Compact tapered barrel set that fits in a 5.5L overflow tank. Suitable for precious metal plating.

  6. Tapered Barrel-Syachihoko® Rugby-ball type(B-76-KWFN-BW-1/B-76-KWFN-BW-2)

    Tapered Barrel Shachihoko -model with rugby-ball shaped drum. Drum Volume is 290mL.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top