B-90-A10-M1B30 MINI MINI FILTER 10B

Filter using fluoro-rubber hose.
Since filter is transparent, it is possible to observe the filter-cartridge.
Optimal for use with 3μm cartridge.

Input Voltage AC100V, 13W/15W
Rated Output5W
Outer (Installation) Dimensions180 (L)×220 (W)×200 (H) mm
Main Unit Weight2.3kg
Flow-RateMAX 3.4 L/min
Material (Wetted)Acryl/Fluoro-rubber (hose) /PP
Heatproof Temp.65℃
Cartridge (incl.)3μm (1 pc.)

Related Article

Mini Mini Filter Comparison Table 

Related Products

  1. B-90-A25-SELNI Mini-Mini Filter Model-25S for Electroless Nickel

    A specially designed filter for electroless nickel, which is made of a heat-resistant stainless steel pump and PTFE tubing. Since the pump is SUS304, passivation is possible.

  2. B-90-A06-APF-M MINI MINI FILTER 06APF (Acrylic-Type)

  3. Air pump S101/M202 (A-63-S101/A-63-M202)

  4. B-90-A06-APFW MINI-MINI FILTER 06APFW (AC220-240 Type)

  5. Mini-Mini Filter Model-30FK for Gold plating (B-90-A30-FKAu)

    Compact filter for use of gold plating. PTFE tube-filter with excellent heat-resistant and chemical-resistant properties.

  6. B-92-M10-P04A AIR PUMP (10L TANK-USE)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top