PLATING ANALYZER
A-16 COPPER PYROPHOSPHATE PLATING TEST KIT
This kit measures concentration of metallic copper and potassium pyrophosphate in the copper pyrophosphate plating bath.
Titrimetric analysis can be easily performed by adding dedicated reagents, such as A-solution,
B-solution, and other solutions,to the testing-stand in the order of prescribed methods.
The test kit is a direct-reading type. Concentration (g/ℓ) of compound within 1ℓ of plating solution can be read directly from the burette’s scale.
Titration analyzers are widely distributed overseas and English instructions are indicated on the testing-stand included in the kit.
Outer (Installation) Dimensions | 220 (L)×500 (W)×500 (H) mm |
Material | Pyrex Glass,Acryl, PVC, SUS304, Brass |
Related Products
-
A-24 ALUMITE ELECTROLYTE TEST KIT
-
A-13-S ANALYTICAL REAGENT SET FOR COPPER CYANIDE
-
A-23-S ANALYTICAL REAGENT SET FOR CUPURIC CHLORIDE
-
A-22 ELECTROLESS NICKEL PLATING TEST KIT
-
A-26 ALUMITE PHOSPHATE TEST KIT
This kit measures Phosphoric acid in anodized aluminum electrolyte very easily.
-
A-30-01 CHROMIUM PLATING Baume HYDROMETER