,

Plating equipment with preparation tank and Electrolytic Refining equipment (A-64)

Suitable for long time plating

We accept semi-ordered plating equipment and electrolytic refining equipment of 10L to 200L size (the photo is a 3-tank type).

We will also make a spare tank and a water supply tank so that it can withstand long-duration plating.

We can produce electroforming plating, composite plating, barrel plating, precision plating on wafers, etc., electroless plating, anodic oxidation, electrolytic polishing, etc., for small parts according to your needs.

Material of TanksHeat resistant PVC
Outer dimensions780 (W) × 450 (D) × 700 (H) mm
(an example of product shown in the photo above)
Input voltage of pumpsAC 100V or AC 200V

Related Products

  1. ELECTROLESS PLATING TANK SET 10L(A-50-8-YPT/A-50-9-YPT)

    This 10L plating equipment set is convenient for experiments and prototypes such as electroless copper plating.

  2. ,

    B-89-LAK　BEAKER-KUN

    Plating jig to make your beaker experiments easier and more accurate.   5 sizes available: 200mL, 500mL, 1L, 2L and 3L beakers

  3. ELECTROLESS NICKEL PLATING EQUIPMENT WITH AUTO SUPPLY TANK（A-50-WF）

    Plating tank, filter, thermostats, and liquid replenish equipment are combined.

  4. B-89-EP Various Type of Plating Solution

    Base bath plating solution without additives for convenient experimentation. By adding any amount of additives, you can find the optimal amount of additives.

  5. A-50 ELECTROLESS NICKEL PLATING TANK SET 2L・10L・20L

    Standard stainless-steel and double-walled plating tank used for electroless nickel plating. High-temperature experiments up to 95℃ can be conducted.

  6. 2L Laboratory Tank PVC2000w Set (B-89-CE02TPVWT1/B-89-CE-02TPVWT)

    With a square and a small amount of liquid of 2L, you can easily perform experiments with good reproducibility. The anode and cathode can be easily fixed. We have a large number of optimal peripheral devices such as anode plates, power supplies, and rocking devices as options. We also accept customization such as arranging multiple tanks to make a plating line.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top