Clip with bar

Shaft bar with clips that can hold a plate up to 10 mm thick.
Can be hooked onto a busbar.
The titanium clip at the tip is also available as a stand-alone product. →Titanium clips are also available.

Specification

Product No.Product NameNumber of ClipsTotal lengthShaft bar widthBending inner diameter
B-89-01LAK-P04Jig with 1 Titanium Clip(for Beaker-KUN 200,500)1133mm6mm3mm
B-89-01LAK-P01Jig with 1 Titanium Clip1155mm6mm3mm
B-89-01LAK-P02Jig with 2 Titanium Clips
2204mm6mmー
B-96-P02Brass Clip with Copper Bar1135mm10mm5.5mm
B-96-P03Stainless-steel Clip with Titanium Bar1136mm10mm5.5mm
B-96-P04APlatinum Coated Titanium Clip with Titanium Bar1148mm10mm5.5mm

Related Products

  1. ,

    B-89-LAK　BEAKER-KUN

    Plating jig to make your beaker experiments easier and more accurate.   5 sizes available: 200mL, 500mL, 1L, 2L and 3L beakers

  2. Gold plating clip

    These gold plated clips are made of SUS, which are used in our lead wire. Since contact resistance is stable, stable plating is possible.

  3. Rack for 10L/20L Plating Tank B-92-P06

    Racks for holding plated samples. It can be used for various shapes such as plates, small items, and pipe samples.

  4. Titanium Clip

  5. B-89 BEAKER CLASPS(various types)

    This clasps for beakers is convenient for simple experiments on plating using your own beakers. 500mL to 5L beakers are standard.

  6. Platinum Coated Titanium Clip (B-52-P05-5)

    Platinum plated clip for lead wires. Base material is titanium. Since contact resistance is stable, stable plating is possible.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top