B-53-SMW Smart Hull Cell（500mL）

Trademark Registered　 Patented

Smart Hull Cell is designed to allow an overflow of solution, by use of a magnetic stirrer. Recommended for composite plating with powder and so on.

Smart Hull Cell has 2 models. B-53SMW, for the heater with built-in thermal fuse, and B-53SM, for the heater without thermal fuse (B-53SM is Japanese market only).
Heater, Stirrer and Stirrer Cover are sold separately. Hot Stirrer cannot be used.

Specification

Outer Dimensions160 ( D ) × 154 ( W ) × 90 ( H ) mm
Tank Volume500ml
Tank MaterialAcryl
Heatproof Temp.65℃

Product Movie

*February 2022: B-53-SM will be discontinued as of April 30, 2022. Please use the successor model (B-53-SMW). (Click here for details)

Related Products

  1. ,

    HULL CELL HEATER (B-58WJB/B-58WB/B-58WB-Cr/B-58-WJB-Cr)

  2. ,

    B-59 HULL CELL ANODE PLATES

  3. Hull Cell (Hexavalent-Chromium-use)1L（B-56W）

    Hull Cell dedicated for Hexavalent-chromium plating. Heater with built in thermal fuse can be attached to this Hull Cell.

  4. ,

    B-60 HULL CELL CATHODE PLATES（test piece）

  5. ,

    HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

    Hull Cell Test Kit that consist of Thermostat and Heater with built-in thermal fuse. This set is compliant with IEC standard and bears CE marking.

  6. STIRRER FOR HULL CELL

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top