10L PLATING TANK (B-92-M10-P01)

Tank with drain cock and overflow baffle plate (removal-type).

Internal DimensionsD230×W240×H280mm (When a baffle plate is not used)
Outer DimensionsD260×W284×H295mm
Tank VolumeApprox. 10L
Tank MaterialPVC
Heatproof Temp.65℃
Compatible HeaterB-83WJC1

Related Article

Plating Tank Size List

Related Products

B-92-M10A 10L PLATING TANK SET

 

Related Products

  1. 2L Laboratory Tank PVC2000(B-89-CE-02T-PVW)

    A tank which enables to perform simple experiments more easily and accurately with relatively small liquid volume. Fixing anode and cathode is easier and user-friendly.

  2. ,

    SILICON WAFER PLATING TANK (A-52-ST-P01A)

  3. ,

    Smart Cell ®(Model-500G)(A-56-0500G)

    It is a glass tank type of the smart cell series that overflow circulates using a magnetic stirrer without using pumps. Fluctuations in the liquid level due to evaporation, etc., can be suppressed by overflow stirring, and stable current distribution and plating area can be maintained.

  4. ELECTROLESS NICKEL PLATING TANK(A-50-P)

    Stainless steel tank for electroless nickel plating with a double-layer structure for excellent heat retention.

  5. 2L PVC LABORATORY TANK (B-89-CE-02T-PV)

  6. SPIRAL CONTRACT-METER TANK(B-72-P01W/B-72-P01WJ)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top