B-76-V MINI DECOMPRESSION WATER TANK FOR BARREL

Tank into which horizontal barrel can be placed and pressure reduced.
Barrels can also be rotated inside the tank.
For products shaped to easily let air inside, it will be possible to let solution efficiently flow inside because of the reduced pressure.

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. B-74-M1AWJ-T04 MICRO BARREL AND STIRRER SET

    Tapered-type barrel for electroplating with drum volume of 15mℓ. By adopting porous drum, it became possible to plate on small parts which have not been able to be treated by existing barrel equipment.

  2. Drum for Tapered Barred Shachihoko and Shachihoko Mini

  3. MINI BARREL100w / 100Aw (B-76-03W /B-76-03AW )

    Horizontal-type barrel for electroplating with drum volume of 100mL. Since drum is removable, workpieces for plating can be easily taken in and out.

  4. Tapered Barrel-Syachihoko® Rugby-ball type(B-76-KWFN-BW-1/B-76-KWFN-BW-2)

    Tapered Barrel Shachihoko -model with rugby-ball shaped drum. Drum Volume is 290mL.

  5. TENORI (hand palm-size) BARREL Aw (B-76-02AW)

  6. Tapered Barrel Plating Equipment “Shachihoko”(B-76-KWFN-W)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top