PLATING ANALYZER
A-22 ELECTROLESS NICKEL PLATING TEST KIT
This kit measures concentration of metallic nickel and sodium Hypophosphite in the electroless(chemical) nickel plating bath.
Titrimetric analysis can be easily performed by adding dedicated reagents, such as A-solution,
B-solution, and other solutions,to the testing-stand in the order of prescribed methods.
The test kit is a direct-reading type. Concentration (g/ℓ) of compound within 1ℓ of plating solution can be read directly from the burette’s scale.
Titration analyzers are widely distributed overseas and English instructions are indicated on the testing-stand included in the kit.
Outer (Installation) Dimensions | 220 (L)×500 (W)×500 (H) mm |
Material | Pyrex Glass,Acryl, PVC, SUS304, Brass |
Related Products
-
A-21-S ANALYTICAL REAGENT SET FOR STRIKE NICKEL
-
A-04B TRICHROM-METER
Measures trivalent chromium and iron in chromium plating solution by reagent coloration.Photoelectrometer direct-reading type. How to control the trivalent chromium for chromium plating and the content of iron as an impurity for the hard chromium plating are also very important. However the performance of oxidation-reduction analysis by titration is unstable and difficult for the average people. By this method, the Hexavalent chromium in the chromium plating solution is removed by adsorption, and the trivalent chromium and iron are colored with reagents and measured quickly and accurately (direct reading in g/ℓ).
-
A-30-05 PLATING HYDROMETER (MODEL 4)
-
A-23-S ANALYTICAL REAGENT SET FOR CUPURIC CHLORIDE
-
A-17 ACID & ALKALI TEST KIT
-
A-23 CUPRIC CHLORIDE ETCHING SOLUTION TEST KIT