PLATING ANALYZER
A-17 ACID & ALKALI TEST KIT
This kit measures concentration of sulfuric acid, hydrochloric acid and sodium hydroxide in the acid pickle or degreasing etc.
Titrimetric analysis can be easily performed by adding dedicated reagents, such as A-solution,
B-solution, and other solutions,to the testing-stand in the order of prescribed methods.
The test kit is a direct-reading type. Concentration (g/ℓ) of compound within 1ℓ of plating solution can be read directly from the burette’s scale.
Titration analyzers are widely distributed overseas and English instructions are indicated on the testing-stand included in the kit.
Outer (Installation) Dimensions | 220 (L)×500 (W)×500 (H) mm |
Material | Pyrex Glass,Acryl, PVC, SUS304, Brass |
Related Products
-
A-13 COPPER CYANIDE PLATING TEST KIT
-
A-04B TRICHROM-METER
Measures trivalent chromium and iron in chromium plating solution by reagent coloration.Photoelectrometer direct-reading type. How to control the trivalent chromium for chromium plating and the content of iron as an impurity for the hard chromium plating are also very important. However the performance of oxidation-reduction analysis by titration is unstable and difficult for the average people. By this method, the Hexavalent chromium in the chromium plating solution is removed by adsorption, and the trivalent chromium and iron are colored with reagents and measured quickly and accurately (direct reading in g/ℓ).
-
A-01A SULPHAMETER SET
This device analyzes sulfuric acid concentration in chromium plating solution by centrifugal precipitation method. While titration analysis takes a lot of time to analyze sulfuric acid, it can be easily analyzed by using this product.
-
A-24 ALUMITE ELECTROLYTE TEST KIT
-
A-11-S ANALYTICAL REAGENT SET FOR ZINC CYANIDE
-
A-12-S ANALYTICAL REAGENT SET FOR ZINCATE