A-06 SURFACE TENSIONMETER

Du Nouy Method is applied for simple measurement of surface tension. Optimal for control of chromium, zincate, nickel plating solutions, etc.
Surface tension measurement can be easily taken.

Outer (Installation) Dimensions300(L)x300(W)x300(H)mm
Main Unit Weight2kg

Related Products

  1. A-30-04 PLATING HYDROMETER (MODEL 3)

  2. ,

    A-23-S ANALYTICAL REAGENT SET FOR CUPURIC CHLORIDE

  3. ,

    A-17-S ANALYTICAL REAGENT SET FOR ACID AND ALKALI

  4. A-15 CHLORINE CONTENT TEST KIT (in copper sulfate plating Solution)

  5. A-04B TRICHROM-METER

    Measures trivalent chromium and iron in chromium plating solution by reagent coloration.Photoelectrometer direct-reading type. How to control the trivalent chromium for chromium plating and the content of iron as an impurity for the hard chromium plating are also very important. However the performance of oxidation-reduction analysis by titration is unstable and difficult for the average people. By　this method, the Hexavalent chromium in the chromium plating solution is removed by adsorption, and the trivalent chromium and iron are colored with reagents and measured quickly and accurately (direct reading in g/ℓ).

  6. ,

    A-15-S ANALYTICAL REAGENT SET FOR CHLORINE CONTENT IN COPPER SULFATE PLATING

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top