,

A-15-S ANALYTICAL REAGENT SET FOR CHLORINE CONTENT IN COPPER SULFATE PLATING

It is a set of the analytical reagent for chlorine content in Copper sulfate plating.

Breakdown:
A-15-S01 Solution A 1000mL
A-15-S02 Solution B 1000mL
A-15-S03 Activated carbon　50times

*It can be bought individually.
*The photograph is example.

Related Products

  1. A-01A SULPHAMETER SET

    This device analyzes sulfuric acid concentration in chromium plating solution by centrifugal precipitation method. While titration analysis takes a lot of time to analyze sulfuric acid, it can be easily analyzed by using this product.

  2. A-22 ELECTROLESS NICKEL PLATING TEST KIT

  3. ,

    A-25-S ANALYTICAL REAGENT SET FOR NICKEL ACETATE (for alumite sealing solution)

  4. A-04B TRICHROM-METER

    Measures trivalent chromium and iron in chromium plating solution by reagent coloration.Photoelectrometer direct-reading type. How to control the trivalent chromium for chromium plating and the content of iron as an impurity for the hard chromium plating are also very important. However the performance of oxidation-reduction analysis by titration is unstable and difficult for the average people. By　this method, the Hexavalent chromium in the chromium plating solution is removed by adsorption, and the trivalent chromium and iron are colored with reagents and measured quickly and accurately (direct reading in g/ℓ).

  5. A-13 COPPER CYANIDE PLATING TEST KIT

  6. A-30-04 PLATING HYDROMETER (MODEL 3)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top