PLATING ANALYZER
A-12 ZINCATE PLATING TEST KIT
This kit measures concentration of metallic zinc and sodium hydroxide in the zincate plating bath.
Titrimetric analysis can be easily performed by adding dedicated reagents, such as A-solution,
B-solution, and other solutions,to the testing-stand in the order of prescribed methods.
The test kit is a direct-reading type. Concentration (g/ℓ) of compound within 1ℓ of plating solution can be read directly from the burette’s scale.
Titration analyzers are widely distributed overseas and English instructions are indicated on the testing-stand included in the kit.
Outer (Installation) Dimensions | 220 (L)×500 (W)×500 (H) mm |
Material | Pyrex Glass,Acryl, PVC, SUS304, Brass |
Related Products
-
A-12-S ANALYTICAL REAGENT SET FOR ZINCATE
-
A-22-S ANALYTICAL REAGENT SET FOR ELECTROLESS NICKEL PLATING
-
A-30-08 PERCENT HYDROMETER (SODIUM HYDROXIDE)
-
A-06 SURFACE TENSIONMETER
-
A-25-S ANALYTICAL REAGENT SET FOR NICKEL ACETATE (for alumite sealing solution)
-
A-15-S ANALYTICAL REAGENT SET FOR CHLORINE CONTENT IN COPPER SULFATE PLATING