,

HA-07-S ANALYTICAL REAGENT FOR CHLORINE CONTENT IN CHROMIUM PLATING

【Information】
The manual type of Sulphameter was stopped selling.Chlorine content in the chromium plating cannot be measured by current Sulphameter(power-operated type).It will continue selling the reagent by using the manual type of Sulphameter,only.

Related Products

  1. A-30-03 PLATING HYDROMETER (MODEL 2)

  2. A-04B TRICHROM-METER

    Measures trivalent chromium and iron in chromium plating solution by reagent coloration.Photoelectrometer direct-reading type. How to control the trivalent chromium for chromium plating and the content of iron as an impurity for the hard chromium plating are also very important. However the performance of oxidation-reduction analysis by titration is unstable and difficult for the average people. By　this method, the Hexavalent chromium in the chromium plating solution is removed by adsorption, and the trivalent chromium and iron are colored with reagents and measured quickly and accurately (direct reading in g/ℓ).

  3. A-30-04 PLATING HYDROMETER (MODEL 3)

  4. ,

    A-01-S ANALYTICAL REAGENT SET FOR SULPHAMETER

  5. A-16 COPPER PYROPHOSPHATE PLATING TEST KIT

  6. A-30-05 PLATING HYDROMETER (MODEL 4)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top