BRUSH PLATING
BP- Brush Plating Solutions
Electrolytic Degreasing Solution
The force generated when gas is used to peel off and remove dirt that has adhered to the surface of the object to be plated. If the base is aluminum, use aluminum, otherwise use( I )general use.
Product No. | Product Name | Volume |
---|---|---|
BP-ELC-01 | Electrolytic Degreasing Solution (1)(for general use) | 500mL |
BP-E-02 | Chromium Peeling Solution | 500mL |
BP-ELC-02 | Electrolytic Degreasing Solution (for Aluminium) | 500mL |
Activated Solution
This is a method of immersing the object to be plated in an acid solution to remove the remaining thin oxide film.
It is essential for good plating adhesion. Select the activator according to the material of the object to be plated.
Product No. | Product Name | Volume |
---|---|---|
BP-ACT-01 | Activated Solution (1) (for over Stainless-steel/ Chromium Plating) | 500mL |
BP-ACT-02 | Activated Solution (2) (for Copper, Copper Alloys,Pure Iron) | 500mL |
BP-ACT-C | Activated Solution (3) (for Carbon Steel) | 500ml |
BP-ACT-04 | Activated Solution (4) (for Carbon Steel, etc. Etching) | 500ml |
BP-ACT-Ni | Activated Solution (5) (for over Nickel Plating) | 2 bottles/set(500mL/btl) |
BP-ACT-Ni-1 | Activated Solution (5-1) (for over Nickel Plating 1) | 500ml |
BP-ACT-Ni-2 | Activated Solution (5-2) (for over Nickel Plating 2) | 500ml |
BP-ACT-AL-1 | Activated Solution (6-1) (for Aluminium Etching A2024/A5052/A6061) | 500ml |
BP-ACT-AL-2 | Activated Solution (6-2) (for Aluminium A2024/A5052/A6061) | 500ml |
Brush Plating Solution
We have about 20 kinds of brush plating solution depending on what you want to plate.
Product No. | Product Name | Volume |
---|---|---|
BP-AU-02 | Non-cyanide Gold Plating Solution | 50ml |
BP-AG-03 | Non-cyanide Silver Plating Solution(all-included set, 4bottles) | 1set |
BP-AG-03-1-P1 | High Concentration Non-cyanide Silver Plating Solution | 100ml |
BP-AG-03-1-P2 | High Concentration Non-cyanide Silver Plating A-Solution | 500ml |
BP-AG-03-2-P1 | Non-cyanide Silver Strike Solution | 100ml |
BP-AG-03-2-P2 | Non-cyanide Silver Strike A-Solution | 500ml |
BP-PD-02 | Palladium Plating Solution | 100ml |
BP-PT-02 | Platinum Plating Solution | 100ml |
BP-RH-01 | Rhodium Plating Solution | 25ml |
BP-CU-01 | Copper (acidic) Plating Solution | 500ml |
BP-CU-02 | Copper (alkaline) Plating Solution | 500ml |
BP-CU-03 | Thick Copper (acidic) Plating Solution | 500ml |
BP-CU-04 | Copper (neutral) Plating Solution | 500ml |
BP-NI-01 | Nickel (acidic) Plating Solution | 500ml |
BP-NI-04 | Strike Nickel Plating Solution | 500ml |
BP-NI-05 | Black Nickel (alkaline) Plating Solution | 500ml |
BP-NI-06 | Nickel (neutral) Plating Solution | 500ml |
BP-NI-09 | Strike Nickel (for Aluminium) Plating Solution | 500ml |
BP-NIW-01 | Nickel Tungsten Plating Solution | 500ml |
BP-CO-01 | Cobalt Plating Solution | 500ml |
BP-CR-02 | Nickel Cobalt Plating Solution (Hexavalent Chromium Color Plating Solution) | 500ml |
BP-SN-01 | Tin(alkaline) Plating Solution | 500ml |
BP-SN-02 | Tin(acidic) Plating Solution | 500ml |
BP-SNIN-01 | Tin / Indium Plating Solution | 500ml |
BP-ZN-02 | Zinc (acidic) Plating Solution | 500ml |
Related Products
-
Brush Tip Impregnant for SS-1(A-43-SS-1-P03)
When using a Brush tool, an impregnating material such as absorbent cotton that contains a plating solution is required. This brush tip is a pen tip-shaped impregnating material that is used by inserting it into the platinum of the brush tool SS-1. Suitable for more detailed work than conventional cotton.
-
A-43-PU Pump for brush plating
-
B-67 SILICON RECTIFIER (MODEL 3A-2)
-
A-43-BEP Pump for electropolishing
-
B-63 SILICON RECTIFIER FOR ALUMITE/BRUSH PLATING
-
A-43 BRUSH PLATING
Brush plating is effective when you want to plate only a part for repairing scratches, or when you want to plate with a small amount of liquid to save expensive chemicals. This page explains the list of brush for plating.