,

B-59 HULL CELL ANODE PLATES

Material

  • Oxygen-free Copper,
  • Phosphorous Copper,
  • Cobalt,
  • Lead,
  • Lead Alloy,
  • Nickel, SK Nickel（Sulfur depolarized nickel)
  • Cadmium,
  • Platinum coated Titanium
  • Zinc
  • Tin
  • Tin Alloy
  • Silver
  • Solder
  • Carbon
  • SUS304
  • SUS316
  • Iron
  • Iridium Coated Titanium(for Copper Sulfate Bath)
  • Iridium Coated Titanium (for Gold, Trivalent Chromium Bath)
  • Rodium
  • Indium, etc,

Size

64×64×2mm

*Anode of TENORI hull cell is a small Titanium/Platinum only.

Related Products

  1. ,

    HULL CELL HEATER (B-58WJB/B-58WB/B-58WB-Cr/B-58-WJB-Cr)

  2. ,

    HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

    Hull Cell Test Kit that consist of Thermostat and Heater with built-in thermal fuse. This set is compliant with IEC standard and bears CE marking.

  3. Special Order

    Product page for anode plates and cathode plates (test pieces) of electrodes for plating.

  4. ,

    B-60 HULL CELL CATHODE PLATES（test piece）

  5. List of Hull Cells

    17 types of hull cell are available according to material, size and application.

  6. ,

    Wafer Anode Plate

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top