TRIAL AND SMALL-LOT PRODUCTION KIT
A-62 ADDITIVE DROPPING PUMP
Small dropping-pump used for small amounts of additives / pH-control solutions. There are different types of pumps for various solutions. By using the attachment, the discharging section can be directly mounted to the edge of the beaker or tank. Can be conveniently used since it does not require space and is quiet during use.
(Electroless Plating Tank and Thermostat are separately sold.)
Input Voltage | AC100 - 120V, 50/60Hz |
Material(Wetted) | Glass, PVC, EPDM, COC |
Outer Size | 120 (L)×190 (W)×300 (H) mm(Include stand) |
Flow-rate | MAX. 8 ml/min. |
Main Unit Weight | Approx. 1.0kg |
Related Products
-
B-92-M10A 10L PLATING TANK SET
Tank made of PP is optimal for laboratory experiments, trial production and noble metal plating. If used side-by-side in parallel position, a mobile and simplified plating line can be composed immediately.
-
B-92-WR-PPM1-T01 20LRINSE TANK CIRCULATION TYPE SET
-
ELECTROLESS NICKEL PLATING EQUIPMENT WITH AUTO SUPPLY TANK(A-50-WF)
Plating tank, filter, thermostats, and liquid replenish equipment are combined.
-
20L OVERFLOW PLATING TANK SET(B92WFPPM1T01WJ)
Plating set that includes a 20L tank that constantly being filtered and cause gentle convection flow to make liquid overflow.
-
B-89-EP Various Type of Plating Solution
Base bath plating solution without additives for convenient experimentation. By adding any amount of additives, you can find the optimal amount of additives.
-
2L LABORATORY SQUARE TANK (B-89-CELL-02N)
A tank for plating experiments with as little as 2 liters of liquid, with dimensions to hold 4-inch wafers or 100 x 100 mm samples.