A-53-M1-P05WA MICRO CELL ⅠW/ⅡW 50W HEATER

There is a small heater for micto cell ⅠW/ⅡW.
It is possible to use it for small plating tank.

This heater is with a thermal fuse, for w-type tank and Thermostat YTC-300 use.

OutputDC48V, 50W
Length135mm
Pipe diameter8mm
Heat-generating part50mm

Related article

List of Laboratory Heaters and How to Choose

Related Products

  1. ,

    WAFER TANK HEATER (A-52-ST4-P10WJ/W )

  2. 400W Porcelain Heater (B-86MW400)

  3. 100W LABORATORY-USE IMMERSION HEATER(B-82WB/B-82WJB)

  4. B-93C 1KW DIGITAL-TYPE THERMOSTAT

    ON/OFF control for rise in temperature can be used within the range of 0 - 200.0℃. Temperature sensor is protected by glass tube.

  5. B-95-1A 500W QUARTZ HEATER

  6. B-93-YTC1KL Thermostat YTC-1KL

    Thermostat AC100V-240V input, compatible with all voltages worldwide. ( ※ When AC100V is input, it outputs AC100V, and when AC240V is input, it outputs AC240V. No voltage converter function.) By constantly monitoring heater current, output is automatically shut off when any abnormality is detected. Design is compliant with international standard and bears CE mark. Equips ELCB.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top