A-62 ADDITIVE DROPPING PUMP

Small dropping-pump used for small amounts of additives / pH-control solutions. There are different types of pumps for various solutions. By using the attachment, the discharging section can be directly mounted to the edge of the beaker or tank. Can be conveniently used since it does not require space and is quiet during use.
(Electroless Plating Tank and Thermostat are separately sold.)

Input VoltageAC100 - 120V, 50/60Hz
Material(Wetted)Glass, PVC, EPDM, COC
Outer Size120 (L)×190 (W)×300 (H) mm(Include stand)
Flow-rateMAX. 8 ml/min.
Main Unit WeightApprox. 1.0kg

Related Products

  1. ELECTROLESS PLATING TANK SET 10L(A-50-8-YPT/A-50-9-YPT)

    This 10L plating equipment set is convenient for experiments and prototypes such as electroless copper plating.

  2. ,

    2L LABORATORY SQUARE TANK (B-89-CELL-02N)

    A tank for plating experiments with as little as 2 liters of liquid, with dimensions to hold 4-inch wafers or 100 x 100 mm samples.

  3. B-89-EP Various Type of Plating Solution

    Base bath plating solution without additives for convenient experimentation. By adding any amount of additives, you can find the optimal amount of additives.

  4. ELECTROLESS NICKEL PLATING EQUIPMENT WITH AUTO SUPPLY TANK（A-50-WF）

    Plating tank, filter, thermostats, and liquid replenish equipment are combined.

  5. 20L OVERFLOW PLATING TANK SET(B92WFPPM1T01WJ)　

    Plating set that includes a 20L tank that constantly being filtered and cause gentle convection flow to make liquid overflow.

  6. A-50 ELECTROLESS NICKEL PLATING TANK SET 2L・10L・20L

    Standard stainless-steel and double-walled plating tank used for electroless nickel plating. High-temperature experiments up to 95℃ can be conducted.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top