,

B-52-1CWJ HULL CELL TEST KIT MODEL-10A15

Hull cell test is a simple and effective testing-method, by which electroplating characteristics can be examined. It is also adopted as a testing item in the Plating Skills Assessment 1st Grade Test. Since plating-film of a wide range of cathode current densities can be observed on a single test-piece, it is possible to conduct studies of optimal plating conditions and effects from lack or excess of chemicals (such as additives), existence of trace amount of impure substances and deposition distribution on alloy films. The attached DC Power Supply is of high performance and step current can be programmed within 10mA to 10A range, making it possible to use the kit for purposes other than hull cell tests. This kit is recommended for first-time hull cell users.

 

[Set includes: Hull Cell Thermostatic-Control-Type Tank/ Hull Cell Power Supply (YPP15101C, with thermostat/ current integrator/ boil-dry-protection functions, Lead Wire with Titanium Clip)/Heater/Hull Cell Anode & Cathode Plates/ Air Pump, etc.

*The set including Hull Cell Cathode Rocker is also provided.

Related Products

  1. B-53-SMW Smart Hull Cell（500mL）

  2. A-46WJ /A-46W AGITATION EFFECT TESTING KIT

    This is a test device that plating a disk-type test piece (φ64xt03mm) while rotating it with a motor. The effect of agitation speed at a constant current density can be obtained on a single test piece. The effect of the additive on the agitation speed is noticeable.

  3. A-45WJ /A-45W HIGH SPEED PLATING HULL CELL TESTING KIT

    A Hull cell teste that deposited film with a current density distribution for each stirring speed can be obtained on a single test piece. High-speed plating enables experiments with a current density closer to the actual site.

  4. ,

    HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

    Hull Cell Test Kit that consist of Thermostat and Heater with built-in thermal fuse. This set is compliant with IEC standard and bears CE marking.

  5. B-52-TIB　HULL CELL TECHNICAL INFORMATION BOOK

  6. ,

    B-60 HULL CELL CATHODE PLATES（test piece）

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top