B-89-VCR200W Vertical Cathode Rocker VCR200W

Suitable for electroless plating. Shake and stop freely

VCR is a small-sized impact rocker. VCR moves plating sample upward-and-downward with drawing arc, and add impact to remove bubbles on the surface of samples. Suitable for beaker experiment.

Two different types of controllers, simplified speed controller with a knob to adjust speed, and programmable controller which can run maximum 10-step programmed operation are available.

*Made-to-order item

InputAC 100V - 240V
Rocking width10mm (in case length of busbar is 160mm)
No. of rotations0 - 18 RPM
Power consumption5W
Outer dimensions120 (D) × 320 (W) × 135-220 (H) mm

Related Articles

Roles of agitator and Comparison table of our products.

Related Products

  1. B-69B/B-69BU/B-69BW HULL CELL CATHODE ROCKER

    Cathode Rocker for Hull Cell test of gold, tin, solder, and other plating to which air agitation is not applied.

  2. A-55-PCR200BW　PADDLE CATHODE ROCKER 200BW

    Compact cathode rocker and agitator that is optimal for Micro Cell Tank or Beaker experiments.

  3. B-89-CRH-M1B VERTICAL CATHODE ROCKER FOR BEAKER PLATING MODEL-1B

    An impact-rocking equipment which moves plating sample upward-and-downward. Convenient for processing in a small tank, such as beakers.

  4. ,

    PADDLE AGITATOR (A-52-ST-P04D)

    Paddle agitator device for plating and is sized for wafer tanks. Agitation in the vicinity of the sample improves the deposition uniformity of plating.

  5. B-93-3D 3-Dimensional Rocker

    Rocking device which moves to 3-axis, vertically, horizontally, and forward-and-backward, which is able to reproduce similar movement to human hand.

  6. 10L/20L CATHODE ROCKER (with Rotation Display) (B-96-RA/B-96-RU/B-96-RW)

    Cathode locker for 10L and 20L plating tanks.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top