10L PLATING TANK (B-92-M10-P01)

Tank with drain cock and overflow baffle plate (removal-type).

Internal DimensionsD230×W240×H280mm (When a baffle plate is not used)
Outer DimensionsD260×W284×H295mm
Tank VolumeApprox. 10L
Tank MaterialPVC
Heatproof Temp.65℃
Compatible HeaterB-83WJC1

Related Article

Plating Tank Size List

Related Products

B-92-M10A 10L PLATING TANK SET

 

Related Products

  1. ,

    2L LABORATORY SQUARE TANK (B-89-CELL-02N)

    A tank for plating experiments with as little as 2 liters of liquid, with dimensions to hold 4-inch wafers or 100 x 100 mm samples.

  2. OVERFLOW PLATING TANK(B-92-WF-PPM1P01W/B-76-KWFN-P09B / B-76-KWMN-P07W)

    The tank is designed to overflow by gentle convection from the bottom of the tank while constantly filtering the water. Suitable for precision plating where current distribution is severe.

  3. SPIRAL CONTRACT-METER TANK(B-72-P01W/B-72-P01WJ)

  4. ERICHSEN TANK(B-78-P01)

  5. ELECTROLESS NICKEL PLATING TANK(A-50-P)

    Stainless steel tank for electroless nickel plating with a double-layer structure for excellent heat retention.

  6. 20L PLATING TANK(B-92-P01)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top