B-92 20L PLATING TANK SET

PP tanks ideal for experiments, prototype production, and precious metal plating. When used side by side, a simple mobile plating line can be quickly configured. When not in use, the tanks can be used as containers for stacking and storing peripheral equipment such as heaters. Please utilize it in combination with the dedicated cathode rocker, anode plate, and filter. For use outside of Japan, it is possible to change to a model combine with CE marking.

Assembly example

①　Long type (Product No. B-92): Busbar is applied to the longitudinal direction of the tank.
②　Short type (Product No. B-92-1): Busbar is applied in the short-hand direction of the tank.
③　For chrome plating (Model No. B-92-CrA/Cr-1A): This set includes a heat-resistant PVC tank, three busbars, and lead wires. Heat resistance temperature is 0 to 70°C.
④　Jet nozzle plating equipment: Equipment that enables high-speed plating by using a jet nozzle to spray the plating solution onto the sample from the side is also available (special order).

Set includes

Product No. Product Name 　①Long ②Short
B-92-P01 20L plating tank 1 1
B-92-P02A 20L plating tank Lead Wire (Red w/2 Titanium Clips, Black w/ 1 C30Clip) 1 1
B-92-P04A 20L plating tank Air Pump (AC100V) 1 1
B-92-P06-1 10L/20L Plating Tank Hairpin-type Rack 1 1
B-92-P06-2 10L/20L Plating Tank Hull Cell Cathode Plate-use Rack 1 1
B-92-P06-3 10L/20L Plating Tank Forked Hairpin-type Rack 1 1
B-92-P05-1 10L/20L Plating Tank Air Pipe(Acrylic)  w/Clasp 2 2
B-92-P03-1 20L plating tank Long Busbar (Width: 25㎜×470㎜) 3
B-92-P03-2 20L plating tank Short Busbar (Width: 25㎜×300㎜) 3

 

Related Products

  1. A-62 ADDITIVE DROPPING PUMP

  2. B-89-EP Various Type of Plating Solution

    Base bath plating solution without additives for convenient experimentation. By adding any amount of additives, you can find the optimal amount of additives.

  3. B-92-M10A 10L PLATING TANK SET

    Tank made of PP is optimal for laboratory experiments, trial production and noble metal plating. If used side-by-side in parallel position, a mobile and simplified plating line can be composed immediately.

  4. A-50 ELECTROLESS NICKEL PLATING TANK SET 2L・10L・20L

    Standard stainless-steel and double-walled plating tank used for electroless nickel plating. High-temperature experiments up to 95℃ can be conducted.

  5. ELECTROLESS PLATING TANK SET 10L(A-50-8-YPT/A-50-9-YPT)

    This 10L plating equipment set is convenient for experiments and prototypes such as electroless copper plating.

  6. B-92-WR-PPM1-T01 20LRINSE TANK CIRCULATION TYPE SET

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top