Drums for horizontal barrel

Three types of drums for horizontal barrels are available: “Standard type (B type),” “Smooth type (D type),” and “Asperous type (D type).

For all three types, the mesh opening can be changed to 0.105 mm, 0.113 mm, 0.289 mm, 0.44 mm, and 0.97 mm (special order).

Please select a mesh drum in consideration of product size and liquid/gas outgassing.

Type B(Standard)Type C（smooth）Type D(Asperous)
段差ありBタイプ滑らかBタイプダイヤカットD
• Frame with mesh can be replaced with
screws.
• There is a step of about 3 mm between
the drum and the mesh inside.

[Compatible Product]
・B-75BW
・B-76-03W

[Special Order Available]
・B-76-02AW
・B-76-KWFN-W
・B-76-KWFN-BW1
・B-76-KWFN-BW2		• A smooth type with almost no steps
between the drum and the mesh inside.
• Mesh cannot be replaced.

[Compatible Product]
・B-75CW
・B-76-02AW
・B-76-03AW
・B-76-KWFN-W
・B-76-KWFN-BW1
・B-76-KWFN-BW2		• An asperous type that prevents items
from sticking to the side of the drum by
adopting asperous surface on the parts
other than the mesh part.
• Mesh cannot be replaced.

[Compatible Product]
・B-76-03AWD

[Special Order Available]
・B-75BW
・B-75CW
・B-76-02AW
・B-76-KWFN-W
・B-76-KWFN-BW1
・B-76-KWFN-BW2

 

 

Related Products

  1. PRETREATMENT AND WASH CONTAINER (B-76-KWFN-MK)

  2. B-73-02AW MINI BARREL FOR ELECTROLESS PLATING(drum type)

  3. Drum for Tapered Barred Shachihoko and Shachihoko Mini

  4. B-74-M1AWJ-T04 MICRO BARREL AND STIRRER SET

    Tapered-type barrel for electroplating with drum volume of 15mℓ. By adopting porous drum, it became possible to plate on small parts which have not been able to be treated by existing barrel equipment.

  5. MINI BARREL MODEL 1-Bw/1-Cw(B-75BW/B-75CW)

    Horizontal-type barrel for electroplating with drum volume of 140mL. Mesh-size can be adjusted. For 30 years, the Mini-Barrel has been our longest-selling product.

  6. Micro Barrel Drum（B-74-M1-P08）

    The drum for MicroBarrel uses a porous drum, which allows liquid to pass through the gaps between the microscopic particles of 10 to 30 µm, resulting in better liquid circulation compared to drums without holes.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top