20L OVERFLOW PLATING TANK SET(B92WFPPM1T01WJ)　

Plating set that includes a 20L tank that constantly being filtered and cause gentle convection flow to make liquid overflow.
Since liquid level can be retained at a constant height, suitable for precision plating which requires accurate current density control.

Standard tank is acrylic, but PP and heat-resistant PVC tanks are also available. Custom-orders are also accepted.

Set includes

Product No. Product Name Quantity
B-92-WFPPM1P01W 20L Overflow Plating Tank MODEL-w (WFPPM1) Acryl 1
B-90-A20-APFA05 Mini-Mini Filter Model-20APFA (0.5μm Cartridge) 1
B-96-1RA-WF 20L Overflow Plating Tank Cathode Rocker (w/Rotation Display/Length of copper bar:610㎜) 1
B-96-P12 20L Overflow Plating Tank Cathode Rocker Height-Adjuster Unit 1
B-93-YPT-01A 1KW Digital-type Thermostat (PlD control, w/ boil-dry protection function) 1
B-50-KTSG251513 Stainless-steel G-type Clasp (Width: 25㎜×15 ,φ13) 1
B-95-1A 500W Quartz Heater (AC100V) 2
B-50-KTSA253038 Stainless-steel A-type Clasp (Width: 25㎜×30 φ38) 2
B-92-P04A 20L plating tank Air Pump (AC100V) 1
B-92-P05-1 10L/20L Plating Tank Air Pipe(Acrylic) w/Clasp 2
B-92-WF-PPM1P02 20L Overflow Plating Tank Busbar (Width: 25×400㎜) 2
B-92-P02A 20L plating tank Lead Wire (Red w/2 Titanium Clips, Black w/ 1 C30Clip) 1

*Anode plates(B-94) are not included in the set and need to be ordered separately.

Related Products

  1. ,

    Plating equipment with preparation tank and Electrolytic Refining equipment (A-64)

    Plating equipment with pre-tank for electroforming, composite plating, barrel plating, wafer plating, electroless plating, anodic oxidation, electrolytic polishing, etc. on small parts.

  2. A-50 ELECTROLESS NICKEL PLATING TANK SET 2L・10L・20L

    Standard stainless-steel and double-walled plating tank used for electroless nickel plating. High-temperature experiments up to 95℃ can be conducted.

  3. ELECTROLESS NICKEL PLATING EQUIPMENT WITH AUTO SUPPLY TANK（A-50-WF）

    Plating tank, filter, thermostats, and liquid replenish equipment are combined.

  4. B-89-EP Various Type of Plating Solution

    Base bath plating solution without additives for convenient experimentation. By adding any amount of additives, you can find the optimal amount of additives.

  5. ELECTROLESS PLATING TANK SET 10L(A-50-8-YPT/A-50-9-YPT)

    This 10L plating equipment set is convenient for experiments and prototypes such as electroless copper plating.

  6. B-92-M10A 10L PLATING TANK SET

    Tank made of PP is optimal for laboratory experiments, trial production and noble metal plating. If used side-by-side in parallel position, a mobile and simplified plating line can be composed immediately.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top