,

Plating equipment with preparation tank and Electrolytic Refining equipment (A-64)

Suitable for long time plating

We accept semi-ordered plating equipment and electrolytic refining equipment of 10L to 200L size (the photo is a 3-tank type).

We will also make a spare tank and a water supply tank so that it can withstand long-duration plating.

We can produce electroforming plating, composite plating, barrel plating, precision plating on wafers, etc., electroless plating, anodic oxidation, electrolytic polishing, etc., for small parts according to your needs.

Material of TanksHeat resistant PVC
Outer dimensions780 (W) × 450 (D) × 700 (H) mm
(an example of product shown in the photo above)
Input voltage of pumpsAC 100V or AC 200V

Related Products

  1. C-BIKA-01 Biofilm reactor

  2. A-62 ADDITIVE DROPPING PUMP

  3. B-92 20L PLATING TANK SET

    This 20L water tank set is ideal for simple experiments for plating. It can be combined to make a plating line. A variety of options such as oscillators and filters are available.

  4. 20L OVERFLOW PLATING TANK SET(B92WFPPM1T01WJ)　

    Plating set that includes a 20L tank that constantly being filtered and cause gentle convection flow to make liquid overflow.

  5. JET PLATING EQUIPMENT

    Plating equipment which blows plating solution onto samples at high speed, in order to perform plating test under high current density conditions.

  6. ,

    2L LABORATORY SQUARE TANK (B-89-CELL-02N)

    A tank for plating experiments with as little as 2 liters of liquid, with dimensions to hold 4-inch wafers or 100 x 100 mm samples.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top