TRIAL AND SMALL-LOT PRODUCTION KIT
B-92-WR-PPM1-T01 20LRINSE TANK CIRCULATION TYPE SET
PP rinse tank divided into four partitions. By supplying the water in the first and second tanks to the plating bath during use, waste-water can be effectively reduced. Only the water in the final tank is circulated for use through ion-exchange (small deionizer is used).
(Custom-orders are also accepted)
Related Products
-
Plating equipment with preparation tank and Electrolytic Refining equipment (A-64)
Plating equipment with pre-tank for electroforming, composite plating, barrel plating, wafer plating, electroless plating, anodic oxidation, electrolytic polishing, etc. on small parts.
-
A-62 ADDITIVE DROPPING PUMP
-
2L Laboratory Tank PVC2000w Set (B-89-CE02TPVWT1/B-89-CE-02TPVWT)
With a square and a small amount of liquid of 2L, you can easily perform experiments with good reproducibility. The anode and cathode can be easily fixed. We have a large number of optimal peripheral devices such as anode plates, power supplies, and rocking devices as options. We also accept customization such as arranging multiple tanks to make a plating line.
-
ELECTROLESS PLATING TANK SET 10L(A-50-8-YPT/A-50-9-YPT)
This 10L plating equipment set is convenient for experiments and prototypes such as electroless copper plating.
-
B-92-M10A 10L PLATING TANK SET
Tank made of PP is optimal for laboratory experiments, trial production and noble metal plating. If used side-by-side in parallel position, a mobile and simplified plating line can be composed immediately.
-
B-89-LAK BEAKER-KUN
Plating jig to make your beaker experiments easier and more accurate. 5 sizes available: 200mL, 500mL, 1L, 2L and 3L beakers