TENORI (hand palm-size) BARREL Aw (B-76-02AW)

Horizontal-type barrel for electroplating with drum volume of 15 mL. The barrel-size is small enough to be held on a lady’s palm. Since drum is removable, articles for plating can be easily taken in and out. Mesh-size can be adjusted.

Specification

No. of Drum Rotations10 - 34 rpm
MaterialAcryl, PP, etc.
Outer (Installation) Dimensions60 (F)× 100 (W)× 135 (H) mm
Drum VolumeApprox. 15mL
Main Unit Weight0.3kg
Heatproof Temp.65℃
Input VoltageAC100V - 240V

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. B-76-KWFN-ST3 TAPERED BARREL EQUIPMENT SET 3

  2. Tapered Barrel Syachihoko® WJ Filter Set (B-76-KWFNWJST2A)

    A set of tapered barrel plating equipment "Shachihoko". Since consists of barrel, heaters, tank, filter, anode plates and other peripherals, convenient to build fine plating process.

  3. B-74-M1AWJ-T04 MICRO BARREL AND STIRRER SET

    Tapered-type barrel for electroplating with drum volume of 15mℓ. By adopting porous drum, it became possible to plate on small parts which have not been able to be treated by existing barrel equipment.

  4. B-76-KWMN-W Tapered Barrel Shachihoko-mini

  5. PRETREATMENT AND WASH CONTAINER (B-76-KWFN-MK)

  6. DUMMY BALLS (B-81)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top