B-76-KWMN-W Tapered Barrel Shachihoko-mini

Dramatically small, able to be installed in 5L beaker.

Our Tapered Barrel “Shachihoko” is widely beloved since its drum inside has little level difference and is very smooth.
Also, mesh opening is approx. 0.1mm precise but liquid can come through the mesh smoothly and easily.

This new product, “Shachihoko-mini”, is developed based on users’ feedback which requires barrel plating equipment suitable for plating with smaller volume of plating solution such as precious metal plating.

Despite the size of drum is same as existing Shachihoko, but Shachihoko-mini is able to be installed inside 5L beaker.
Based on your requirements, we also accept special order request for tanks, drums, electrodes for Shachihoko-mini. Please feel free to contact us.

No. of Drum Rotations0-34rpm (variable)
MaterialPP, etc
Outer (Installation) Dimensions250(D) x 90(W) x 300(H) mm
Drum VolumeApprox. 100mℓ
(volume of samples: approx. 20ml)
Heatproof Temp.90℃

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. B-76-KWFN-ST3 TAPERED BARREL EQUIPMENT SET 3

  2. B-74-M1AWJ-T04 MICRO BARREL AND STIRRER SET

    Tapered-type barrel for electroplating with drum volume of 15mℓ. By adopting porous drum, it became possible to plate on small parts which have not been able to be treated by existing barrel equipment.

  3. Micro Barrel Drum（B-74-M1-P08）

    The drum for MicroBarrel uses a porous drum, which allows liquid to pass through the gaps between the microscopic particles of 10 to 30 µm, resulting in better liquid circulation compared to drums without holes.

  4. B-76-V MINI DECOMPRESSION WATER TANK FOR BARREL

  5. B-73-02AW MINI BARREL FOR ELECTROLESS PLATING(drum type)

  6. MINI BARREL100w / 100Aw (B-76-03W /B-76-03AW )

    Horizontal-type barrel for electroplating with drum volume of 100mL. Since drum is removable, workpieces for plating can be easily taken in and out.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top