BRUSH PLATING
A-43-BEP Pump for electropolishing
Electropolishing is now simple.
Pump for electropolishing with brush equipment. This product supplies chemical for electropolishing to designated brush equipment combined.
Normally, electropolishing requires chemical tanks, but by using this product and brush equipment it becomes much easier to perform electropolishing. Since it does not require a tank, this product is also suitable for big plating sample which is not able to be put into a tank.
Please use this pump along with a dedicated brush (A-43-S-B-BEP/Brush Tip for Electropolishing Pump
Specification
Material of tip of brush | Carbon |
Flow rate | About 6 to 18mL/ min |
Input voltage | AC 100V to 240V |
Related Products
-
B-67 SILICON RECTIFIER (MODEL 3A-2)
-
Brush Tip Impregnant for SS-1(A-43-SS-1-P03)
When using a Brush tool, an impregnating material such as absorbent cotton that contains a plating solution is required. This brush tip is a pen tip-shaped impregnating material that is used by inserting it into the platinum of the brush tool SS-1. Suitable for more detailed work than conventional cotton.
-
A-43 BRUSH PLATING
Brush plating is effective when you want to plate only a part for repairing scratches, or when you want to plate with a small amount of liquid to save expensive chemicals. This page explains the list of brush for plating.
-
A-43-PU Pump for brush plating
-
B-63 SILICON RECTIFIER FOR ALUMITE/BRUSH PLATING
-
BP- Brush Plating Solutions
Solutions for brush plating are available.