BRUSH PLATING
A-43 BRUSH PLATING
Feature
Brush plating differs from normal plating in that it is plated without a tank. The plating is deposited by wrapping absorbent cotton containing an electrolytic solution around an anode shaped like a brush and then contacting it with the cathode (object to be plated). It is effective when you want to plate only a part for repairing scratches, or when you want to plate with a small amount of liquid to save expensive chemicals.
How to select Brush
- Please select the size according to the area you want to plate.
- We recommend using platinum brush tip for the precious metal. For other precious metal, carbon or the same type of plating is recommended.
- Preventing contamination of the plating solution, please prepare one brush for each type of plating solution.
Types of Brush
There are two types of brushes, one with a brush tip(right in figure below) and the other
with a hard brush type that is used by wrapping absorbent cotton(left in figure below). The brush type is suitable for fine processing as it is no need to wrap cotton wool.
Brush List
Product No.. | Product Name | Brush Tip Material /Brush Tip Size | Recommended Plating Area |
---|---|---|---|
A-43-FS-1A | Brush FS -1 (w/Lead Wire/Titanium Clip/Spare Brush Tip) | Brush | up to 30㎟ |
A-43-SS-1A | Brush SS-1 (Brush Tip Platinum w/Lead Wire/Titanium Clip) | Platinum | up to 30㎟ |
φ1x25mm | |||
A-43-SS-3A | Brush SS-3 ( Brush Tip Carbon w/Lead Wire/Titanium Clip/Spare Brush Tip) | Carbon Nickel | up to 30㎟ |
φ3x15mm | |||
A-43-SS-5A | Brush SS-5 ( Brush Tip Carbon w/Lead Wire/Titanium Clip/Spare Brush Tip) | Carbon Nickel Copper | 31-100㎟ |
φ5x35mm | |||
A-43-S-10 | Brush S-10 ( Brush Tip Carbon w/Lead Wire) | Carbon Nickel Copper | 31-100㎟ |
φ10x60mm | |||
A-43-S-20 | BrushS-20 ( Brush Tip Carbon w/Lead Wire) | Carbon | from 100㎟ |
φ20x75mm | |||
A-43-K-A | Brush K- A ( Brush Tip Carbon w/Lead Wire) | Carbon | from 100㎟ |
40x60xt20mm | |||
A-43-K-B | Brush K- B ( Brush Tip Carbon w/Lead Wire) | Carbon | from 100㎟ |
60x40xt20mm | |||
A-43-K-L-Cu A-43-K-L-Ni A-43-K-L-Sn A-43-K-L-Zn | Brush K- L (Brush Tip Copper w/Lead Wire) Brush K- L (Brush Tip Nickel w/Lead Wire) Brush K- L (Brush Tip Tin w/Lead Wire) Brush K- L (Brush Tip Zinc w/Lead Wire) | Copper Nickel Tin Zinc | from 100㎟ |
30x67mm |
Rerated Movie
Related article
Brief explanation of brush plating – what is it and how can I do it?
Related Products
-
BP- Brush Plating Solutions
Solutions for brush plating are available.
-
Brush Tip Impregnant for SS-1(A-43-SS-1-P03)
When using a Brush tool, an impregnating material such as absorbent cotton that contains a plating solution is required. This brush tip is a pen tip-shaped impregnating material that is used by inserting it into the platinum of the brush tool SS-1. Suitable for more detailed work than conventional cotton.
-
A-43-PU Pump for brush plating
-
B-67 SILICON RECTIFIER (MODEL 3A-2)
-
A-43-BEP Pump for electropolishing
-
B-63 SILICON RECTIFIER FOR ALUMITE/BRUSH PLATING