B-76-V MINI DECOMPRESSION WATER TANK FOR BARREL

Tank into which horizontal barrel can be placed and pressure reduced.
Barrels can also be rotated inside the tank.
For products shaped to easily let air inside, it will be possible to let solution efficiently flow inside because of the reduced pressure.

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. Tapered Barrel Syachihoko® WJ Filter Set (B-76-KWFNWJST2A)

    A set of tapered barrel plating equipment "Shachihoko". Since consists of barrel, heaters, tank, filter, anode plates and other peripherals, convenient to build fine plating process.

  2. DUMMY BALLS (B-81)

  3. Tapered Barrel-Syachihoko® Rugby-ball type(B-76-KWFN-BW-1/B-76-KWFN-BW-2)

    Tapered Barrel Shachihoko -model with rugby-ball shaped drum. Drum Volume is 290mL.

  4. B-73-03AW MINI BARREL FOR ELECTROLESS PLATING (disk type)

  5. Cradle Barrel (B-75DW)

    This product helps to untangle and reduce deformation by semi-rotating the plating objects that are easily scratched or deformed due to getting entangled in horizontal barrels.

  6. B-73-02AW MINI BARREL FOR ELECTROLESS PLATING(drum type)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top