Double-sided Wafer Plating Equipment (A-52-STD)

2021 New Product

A double-sided plating device on a wafer, especially suitable for TSV and TGV plating.
・Can be plated on square substrates of 2 to 8 inches or the same size.
・Stir both sides of the wafer with a paddle.
・Supports CE mark on request.

This product is a special order item. We will design and manufacture according to your request.

Set Example

Category Product Name Q’ty
Tank Double-sided plating water tank for wafers 1
Cathode Jig Cathode cartridge for double-sided plating (standard type / sealed type / suction type spy type) 1
Anode Jig Anode holder 2
Heater Heater (AC100V, 100,300,500W) 1
Power Supply Precision plating power supply for wafers （YPP15031WA/15100WA） 1
AirPump Air pump (for medium / 10L tank) 1
Agitator Paddle stirrer for double-sided plating (AC100V, 100-120V, 200-240V) 1
Filter Mini Mini Filter (20APFA / 40APFA) 1
Lead Wire 1
Air filter 1

Related Products

  1. A-52 SILICON WAFER PLATING LABORATORY EQUIPMENT SET

    Plating set for 2～12 inch silicon wafers. By using dedicated jigs, precision plating of semiconductors, MEMS and micromachines is possible.

  2. ,

    Smart Cell ®(Model-500G)(A-56-0500G)

    It is a glass tank type of the smart cell series that overflow circulates using a magnetic stirrer without using pumps. Fluctuations in the liquid level due to evaporation, etc., can be suppressed by overflow stirring, and stable current distribution and plating area can be maintained.

  3. Micro Cell (Ⅰw) Silicon Wafer-use Set YTC300　A-53-*-ST01WB

  4. Silicon Wafer Cathode Cartridge(High current type)(A-52-STH*-P02A)

    Silicon Wafer Cathode Cartridge(High current type)(A-52-STH*-P02A)

  5. B-90-AVS-10 VACUUM DEFOAMER [AUVACS]

  6. Silicon Wafer Cathode Cartridge

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top