,

Programmable Power Supply YPP15031WA（10μA〜3A）(A-57-15031WA)

Features

  • A high-performance programmable power supply which equips estimation/calculation functions and 10μA of min. resolution.
  • Supports Japanese, English, and Chinese.
  • Comply with CE mark.

Functions

Power supply, thermostat, control by PC, plating experiment estimate, data collection and
analysis, expansion board slot.

For

2-4 inch wafer, semiconductor, sensor, MEMS, fine barrel, etc.

Input Voltage AC100~240V±10% (50/60Hz±5%)
Output Voltage/Output CurrentDC0-15V, 0-3A
Minimum Resolution1mV, 10μA, 10μC
Thermostat FunctionAC100~240V, 1KVA
(ON/OFF, PID control)
Outer (Installation) DimensionsD396 × W260 × H221mm
(Protrusions not included)
Main Unit WeightApprox. 10.4kg
Compatible OSWindows,8, 10, 11
StandardIEC61010-1,IEC61326-1,IEC61326-2-2,IEC61000-3-2,　IEC61000-3-3,FCC Part 15 Subpart B

Related Products

  1. ,

    Smart Cell ®(Model-500G)(A-56-0500G)

    It is a glass tank type of the smart cell series that overflow circulates using a magnetic stirrer without using pumps. Fluctuations in the liquid level due to evaporation, etc., can be suppressed by overflow stirring, and stable current distribution and plating area can be maintained.

  2. Wafer Anode Holder

  3. ,

    PADDLE AGITATOR (A-52-ST-P04D)

    Paddle agitator device for plating and is sized for wafer tanks. Agitation in the vicinity of the sample improves the deposition uniformity of plating.

  4. A-52 SILICON WAFER PLATING LABORATORY EQUIPMENT SET

    Plating set for 2～12 inch silicon wafers. By using dedicated jigs, precision plating of semiconductors, MEMS and micromachines is possible.

  5. A-57-15101D PROGRAMMABLE POWER SUPPLY MODEL YPP15101D

    Power supply with thermostat function is suitable for semiconductors, sensors, MEMS and fine barrel plating.

  6. Micro Cell (Ⅰw) Silicon Wafer-use Set YTC300　A-53-*-ST01WB

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top