PRETREATMENT AND WASH CONTAINER (B-76-KWFN-MK)

Because the difference in the basket is extremely smooth. It is the best for the good processing also of ultra-small parts.
It is possible to use it also with Electroless plating.

*With PP screw(M6)
*Handle is sold separately.

Size(inside dimension)95×45mm
Material PP
Heatproof Temp.90℃
Aperture diameter0.1mm
Aperture ratio25％

Related Article

Overview of Barrel Plating Equipment

Related Products

  1. TENORI (hand palm-size) BARREL Aw (B-76-02AW)

  2. B-73-02AW MINI BARREL FOR ELECTROLESS PLATING(drum type)

  3. B-76-V MINI DECOMPRESSION WATER TANK FOR BARREL

  4. Drum for Tapered Barred Shachihoko and Shachihoko Mini

  5. MINI BARREL MODEL 1-Bw/1-Cw(B-75BW/B-75CW)

    Horizontal-type barrel for electroplating with drum volume of 140mL. Mesh-size can be adjusted. For 30 years, the Mini-Barrel has been our longest-selling product.

  6. Tapered Barrel Syachihoko® WJ Filter Set (B-76-KWFNWJST2A)

    A set of tapered barrel plating equipment "Shachihoko". Since consists of barrel, heaters, tank, filter, anode plates and other peripherals, convenient to build fine plating process.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top