B-73-03AW MINI BARREL FOR ELECTROLESS PLATING (disk type)

Horizontal-type barrel for 3.5 inch magnetic-disc, electroless plating. Up to six magnetic discs can be plated at the same time.
2.5 inch-type and magnetic field device are also available.
The main unit can also be used with the drum-type (B-73-02A).The air pump in the photo is sold separately.

Specification

No. of Drum Rotations5-34rpm
MaterialPP, etc.
Outer (Installation) Dimensions160(W)×100 (D)×235 (H) mm
Main Unit Weight0.8kg
Heatproof Temp.90℃
Input VoltageAC100V-240V

Related Articles

Overview of Barrel Plating Equipment

Related Products

  1. MINI BARREL MODEL 1-Bw/1-Cw(B-75BW/B-75CW)

    Horizontal-type barrel for electroplating with drum volume of 140mL. Mesh-size can be adjusted. For 30 years, the Mini-Barrel has been our longest-selling product.

  2. Drums for horizontal barrel

  3. B-76-V MINI DECOMPRESSION WATER TANK FOR BARREL

  4. Tapered Barrel Syachihoko® WJ Filter Set (B-76-KWFNWJST2A)

    A set of tapered barrel plating equipment "Shachihoko". Since consists of barrel, heaters, tank, filter, anode plates and other peripherals, convenient to build fine plating process.

  5. B-73-02AW MINI BARREL FOR ELECTROLESS PLATING(drum type)

  6. Tapered Barrel-Syachihoko® Rugby-ball type(B-76-KWFN-BW-1/B-76-KWFN-BW-2)

    Tapered Barrel Shachihoko -model with rugby-ball shaped drum. Drum Volume is 290mL.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top