Silicon Wafer Cathode Cartridge(High current type)(A-52-STH*-P02A)

・Suitable for wafers of general thickness. (200μm or more)
・Possible to set higher current density than usual such as high speed plating.
・Suitable for plating all surfaces and increasing the total current.
・Plating is also deposited on the contacts (surface contacts) of the electrode ring
・Necessary to peel off the contact plating film on a regular basis
※ Wafer size is designed according to JEITA and SEMI standards. We also manufacture square type.

Specification

MaterialAcryl
Corresponding Inch number4-8inch
Heatproof Temp.0-65℃

Product List

Product No. Product Name
A-52-STH2-P02 2-inch Silicon Wafer Cathode Cartridge(Standard type/High current type)
A-52-STH3-P02 3-inch Silicon Wafer Cathode Cartridge(Standard type/High current type/for 4inch Tank)
A-52-STH4-P02 4-inch Silicon Wafer Cathode Cartridge(Standard type/High current type)
A-52-STH5-P02 5-inch Silicon Wafer Cathode Cartridge(Standard type/High current type/for 6inch Tank)
A-52-STH6-P02 6-inch Silicon Wafer Cathode Cartridge(Standard type/High current/Orientation Flat Spec. )
A-52-STH6-P02N 6-inch Silicon Wafer Cathode Cartridge(Standard type/High current/Notch Spec. )
A-52-STH8-P02 8-inch Silicon Wafer Cathode Cartridge(Standard type/High current type)

 

Related Products

  1. A-52-ST-EL WAFER ELECTROLESS PLATING EQUIPMENT

  2. ,

    WAFER TANK HEATER (A-52-ST4-P10WJ/W )

  3. A-52 SILICON WAFER PLATING LABORATORY EQUIPMENT SET

    Plating set for 2～12 inch silicon wafers. By using dedicated jigs, precision plating of semiconductors, MEMS and micromachines is possible.

  4. Wafer Anode Holder

  5. Double-sided Wafer Plating Equipment (A-52-STD)

    A double-sided plating device on a wafer, especially suitable for TSV and TSG plating, from 2 inch to 8 inch.

  6. ,

    PADDLE AGITATOR (A-52-ST-P04D)

    Paddle agitator device for plating and is sized for wafer tanks. Agitation in the vicinity of the sample improves the deposition uniformity of plating.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top