,

HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

Set consist of Thermostat (AC100-230V) and Heater with built-in thermal fuse (48V,100W)
This set is compliant with IEC standard and bears CE marking.

Set includes

Product No. Product Name B
B-53W Hull Cell (Thermostatic-Control-type Tank) MODEL 3w Made of Acryl 1
B-55 Hull Cell (Standard-type Tank)  Made of Acryl 1
B-59-P02 Hull Cell Anode Plate Sumitomo Electrolytic Nickel(for Watts-Bath) 1
B-59-P04 Hull Cell Anode Plate High-Purity Zinc 1
B-59-P07 Hull Cell Anode Plate Sumitomo SK Nickel (for Sulfamate Bath) 1
B-59-P08 Hull Cell Anode Plate Phosphorous Copper (for Copper Sulfate Bath) 1
B-59-P10 Hull Cell Anode Plate Oxygen-free Copper (Electrolytic Copper) 1
B-59-P12 Hull Cell Anode Plate High-Purity Tin 1
B-60-P01A Hull Cell Cathode Plate Iron (film coating type/100pcs ) 1
B-60-P03 Hull Cell Cathode Plate Brass(100pcs) 1
B-60-P05 Hull Cell Cathode Plate Copper(100pcs) 1
B-61W Hull Cell Scale (Japanese/English) 1
B-52-TIB Hull Cell Technical Information Book (Japanese) 1
B-52-TIB-E Hull Cell Technical Information Book (English) 1
B-52-P03 Thermostat Stand (w/clamp) 1
B-58WB Hull Cell Heater WB/Thermal Fuse (DC48V,100W) 1
B-93-YTC300 Thermostat YTC300 (AC100-230V, 300W) 1
A-57-15100-P01A Programmable Power Supply YPP3,10A Lead Wires (2pcs.w/titanium clip 2pcs , copper clip 1pc) 1

Power supply and air-pump are sold separately.

Related Products

  1. SPIRAL CONTRACT-METER SET (B-72WJ)

    This tester is used to measure the internal stress of plating film and conforms to JIS H8626 standard. It can be used for electroless plating and low stress.

  2. A-46WJ /A-46W AGITATION EFFECT TESTING KIT

    This is a test device that plating a disk-type test piece (φ64xt03mm) while rotating it with a motor. The effect of agitation speed at a constant current density can be obtained on a single test piece. The effect of the additive on the agitation speed is noticeable.

  3. B-53-SMW Smart Hull Cell（500mL）

  4. B-77WJ HARING CELL SET (Type WJ)

    Haring Cell is used to identify macro throwing power of various plating solutions.

  5. B-77W-YTC300 Haring Cell Macrothrowing Power Testing Kit YTC300

    A set that combines CE marking with a temperature controller that supports AC100-230V voltage and a heater with a thermal fuse (DC48V).

  6. Hull Cell (Hexavalent-Chromium-use)1L（B-56W）

    Hull Cell dedicated for Hexavalent-chromium plating. Heater with built in thermal fuse can be attached to this Hull Cell.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top