PLATING TESTER
B-77W-YTC300 Haring Cell Macrothrowing Power Testing Kit YTC300
This is a haring cell set that combines CE marking with a temperature controller that supports AC100-230V voltage and a heater with a thermal fuse (DC48V).
Two cathode plates (test pieces) are fixed to both sides of the tank, and an anode plate is placed in between two cathodes. When the anode is placed at the center of cell, the weight of deposited metal on each cathode become equal.
By changing the balance of distances to the anode from cathodes on both sides and observing the differences of the weight of deposited metal for each cathode, it becomes possible to identify the characteristics of the plating solution.
Mainly used for development of plating solutions, experiment to change the distance between electrodes, and so on.
By using bent cathodes (sold separately), the unit can also be used for covering power testing.
Set Includes
Set without CE marking is also available : B-77WJ >
Product No. | Product Name | Quantity |
B-77-P01W | Haring Cell Tank (w/Anode-busbar) (MODEL-w) | 1 |
B-77-P04 | Stainless-steel Busbar (3 pcs.) applying Haring Cell | 1 |
B-77-P06 | Haring Cell Anode Plate Sumitomo Electrolytic Nickel(for Watts Bath) | 1 |
B-77-P07 | Haring Cell Anode Plate High-Purity Zinc | 1 |
B-77-P12 | Haring Cell Anode Plate Phosphorous Copper (for Copper Sulfate Bath) | 1 |
B-77-P31A | Haring Cell Cathode Plate Iron (film-type/100pcs) | 1 |
B-77-P33 | Haring Cell Cathode Plate Brass (100pcs) | 1 |
B-77-P28 | Haring Cell Anode Plate Anode Bag (Not brushed) | 2 |
B-77-P28-1 | Haring Cell Anode Plate Anode Bag (brushed fabric) | 1 |
B-58WB | Hull Cell Heater WB/Thermal Fuse (DC48V,100W) | 2 |
B-93-YTC300 | Thermostat YTC300 (AC100-230V, 300W) | 1 |
B-93-YTC-P03 | Thermostat YTC Sensor Clasp (Type-Ⅰ) | 1 |
A-57-15100-P01A | Programmable Power Supply YPP3,10A Lead Wires (2pcs.w/titanium clip 2pcs , copper clip 1pc) | 2 |
Related Articles
- Measuring Throwing Power
This article explains “What is throwing power?” ,” What is the Haring cell Test?” and “the usage of haring cell test”.
Related Products
-
SPIRAL CONTRACT-METER SET (B-72WJ)
This tester is used to measure the internal stress of plating film and conforms to JIS H8626 standard. It can be used for electroless plating and low stress.
-
A-45WJ /A-45W HIGH SPEED PLATING HULL CELL TESTING KIT
A Hull cell teste that deposited film with a current density distribution for each stirring speed can be obtained on a single test piece. High-speed plating enables experiments with a current density closer to the actual site.
-
B-72WJ-SG STRAIN GAUGE TYPE STRESS METER
-
B-72W1-YTC300 SPIRAL CONTRACT-METER SET(JIS/ASTM)
-
A-46WJ /A-46W AGITATION EFFECT TESTING KIT
This is a test device that plating a disk-type test piece (φ64xt03mm) while rotating it with a motor. The effect of agitation speed at a constant current density can be obtained on a single test piece. The effect of the additive on the agitation speed is noticeable.
-
B-52-1CWJ HULL CELL TEST KIT MODEL-10A15