B-72WJ-SG STRAIN GAUGE TYPE STRESS METER

Used for measurement of microstress unable to be determined by existing stress-meters. Insert dedicated stress-meter board into the slot of the Programmable Power Supply Model-YPP15100 or YPP15031. The data being measured will be displayed on a real-time basis and accumulated in the computer. The data can be edited using general-purpose spreadsheet software. (PC is sold separately).

[Note] The end of the product number varies depending on the power supply included in a set.
With YPP15100：B-72WJ-SG-100
With YPP15031：B-72WJ-SG-031

[Power Supply/Stress Measurement Board Specifications]
Input VoltageAC100 - 200V±10% (50/60Hz±5%)
Output Voltage/Output CurrentDC0 - 15V/0 - 10A
Minimum Resolution1mA/10mV/0.1mC
Thermostat Function1KW (ON/OFF control/PID control)
Main Unit Weight8.8kg
Compatible OSWindows 98,2000.Me,XP,Vista,7,8,10

 

Related Products

  1. ,

    B-52-1CWJ HULL CELL TEST KIT MODEL-10A15

  2. SPIRAL CONTRACT-METER SET (B-72WJ)

    This tester is used to measure the internal stress of plating film and conforms to JIS H8626 standard. It can be used for electroless plating and low stress.

  3. ,

    HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

    Hull Cell Test Kit that consist of Thermostat and Heater with built-in thermal fuse. This set is compliant with IEC standard and bears CE marking.

  4. B-77WJ HARING CELL SET (Type WJ)

    Haring Cell is used to identify macro throwing power of various plating solutions.

  5. B-72W1-YTC300 SPIRAL CONTRACT-METER SET（JIS/ASTM)

  6. A-46WJ /A-46W AGITATION EFFECT TESTING KIT

    This is a test device that plating a disk-type test piece (φ64xt03mm) while rotating it with a motor. The effect of agitation speed at a constant current density can be obtained on a single test piece. The effect of the additive on the agitation speed is noticeable.

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top