,

Programmable Power Supply YPP15031WA（10μA〜3A）(A-57-15031WA)

Features

  • A high-performance programmable power supply which equips estimation/calculation functions and 10μA of min. resolution.
  • Supports Japanese, English, and Chinese.
  • Comply with CE mark.

Functions

Power supply, thermostat, control by PC, plating experiment estimate, data collection and
analysis, expansion board slot.

For

2-4 inch wafer, semiconductor, sensor, MEMS, fine barrel, etc.

Input Voltage AC100~240V±10% (50/60Hz±5%)
Output Voltage/Output CurrentDC0-15V, 0-3A
Minimum Resolution1mV, 10μA, 10μC
Thermostat FunctionAC100~240V, 1KVA
(ON/OFF, PID control)
Outer (Installation) DimensionsD396 × W260 × H221mm
(Protrusions not included)
Main Unit WeightApprox. 10.4kg
Compatible OSWindows,8, 10, 11
StandardIEC61010-1,IEC61326-1,IEC61326-2-2,IEC61000-3-2,　IEC61000-3-3,FCC Part 15 Subpart B

Related Products

  1. Programmable Power Supply YPP15100WA（1mA〜10A）(A-57-15100WA)

    A high-performance programmable power supply which equips estimation/calculation functions and 1mA of min. resolution. Supports Japanese, English, and Chinese.

  2. Wafer Anode Holder

  3. Micro Cell (Ⅰw) Silicon Wafer-use Set YTC300　A-53-*-ST01WB

  4. A-52-ST-EL WAFER ELECTROLESS PLATING EQUIPMENT

  5. Double-sided Wafer Plating Equipment (A-52-STD)

    A double-sided plating device on a wafer, especially suitable for TSV and TSG plating, from 2 inch to 8 inch.

  6. ,

    SILICON WAFER PLATING TANK (A-52-ST-P01A)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top