B-72WJ-SG STRAIN GAUGE TYPE STRESS METER

Used for measurement of microstress unable to be determined by existing stress-meters. Insert dedicated stress-meter board into the slot of the Programmable Power Supply Model-YPP15100 or YPP15031. The data being measured will be displayed on a real-time basis and accumulated in the computer. The data can be edited using general-purpose spreadsheet software. (PC is sold separately).

[Note] The end of the product number varies depending on the power supply included in a set.
With YPP15100：B-72WJ-SG-100
With YPP15031：B-72WJ-SG-031

[Power Supply/Stress Measurement Board Specifications]
Input VoltageAC100 - 200V±10% (50/60Hz±5%)
Output Voltage/Output CurrentDC0 - 15V/0 - 10A
Minimum Resolution1mA/10mV/0.1mC
Thermostat Function1KW (ON/OFF control/PID control)
Main Unit Weight8.8kg
Compatible OSWindows 98,2000.Me,XP,Vista,7,8,10

 

Related Products

  1. ,

    HULL CELL TEST KIT Model-YTC300 (B-52W-YTC300)

    Hull Cell Test Kit that consist of Thermostat and Heater with built-in thermal fuse. This set is compliant with IEC standard and bears CE marking.

  2. SPIRAL CONTRACT-METER SET (B-72WJ)

    This tester is used to measure the internal stress of plating film and conforms to JIS H8626 standard. It can be used for electroless plating and low stress.

  3. ,

    B-52-1CWJ HULL CELL TEST KIT MODEL-10A15

  4. A-46WJ /A-46W AGITATION EFFECT TESTING KIT

    This is a test device that plating a disk-type test piece (φ64xt03mm) while rotating it with a motor. The effect of agitation speed at a constant current density can be obtained on a single test piece. The effect of the additive on the agitation speed is noticeable.

  5. B-77WJ HARING CELL SET (Type WJ)

    Haring Cell is used to identify macro throwing power of various plating solutions.

  6. B-72W1-YTC300 SPIRAL CONTRACT-METER SET（JIS/ASTM)

PRODUCT CATEGORY


  1. Plating Analyzer
    Titration Analyzers, Boume Hydrometer, Sulphameter,

  2. Plating Test Kit
    Hull Cell Test Kit,Jet Plating,Strain Gauge-Type Stress-Meter,Spiral Contract-Meter, Haring Cell

  3. Wafer Plating Kit
    Silicon Wafer Plating Kit

  4. Laboratory and Small-lot Production Kit
    Beaker-KUN, , 2L laboratory Tank set,

  5. Barrel
    Horizontal Barrel, Tapered Barrel, Micro Barrel,Dummy Ball

  6. Tank
    Materials vary and tank volume from 33ml to 200L

  7. Heater/Thermostat
    Small Heaters, immersion heater, L-type heater

  8. Filter and agitation
    Multi-Filter, Air pump, Air Filter, cartridge

  9. Power Supply
    Programmable Power Supply, Silicon Rectifier, Step-down Transformer

  10. Cathode Rocker
    Paddle Cathode Rocker 200BWA, forr Electroless Plating, Beaker plating

  11. Jig
    Clasp for heater, sensor, Crips for samples, Rack

  12. Anode/Cathhoode
    Size vary, Hole processing and cutting are available

  13. Brush Plating
    For repair of wear and scratches and Decorative plating (engraving, etc.)
Return Top